H5移動端
手機訪問更快捷
微信公眾號
手機簽到贏積分
微信小程序
玩轉移動新營銷
|
>
技術說明
CR1000X是一款低功率的設備,用于傳感器測量、直接/遠程通訊連接、數據分析、外部設備控制、數據和程序的存儲,采用密封裝置屏蔽射頻干擾,金屬不銹鋼外殼。精密時鐘,支持Campbell Scientific 數據采集器通用的類BASIC編程語言—具備數據處理和分析功能。CR1000X 接線面板上有兩個開關12 V 端子, 16 個模擬測量端子,端子可拆卸。
產品規格
Operating Temperature Range |
|
Maximum Scan Rate | 1000 Hz |
Case Material | Anodized aluminum |
Analog Inputs | 16 single-ended or 8 differential (individually configured). Two analog inputs can measure 4 to 20 mA or 0 to 20 mA natively. Four analog inputs can provide pulse/digital I/O functions. |
Pulse Counters | 10 (P1 to P2 and C1 to C8) |
Voltage Excitation Terminals | 4 (VX1 to VX4) |
Maximum Source/Sink Current |
|
Communications Ports |
|
Data Storage Ports | microSD |
Switched 12 Volt | 2 terminals |
Digital I/O | 8 terminals (C1 to C8) configurable for digital input and output. Includes status high/low, pulse width modulation, external interrupt, edge timing, switch closure pulse counting, high-frequency pulse counting, UART, RS-232, RS-485, SDM, SDI-12, I2C, and SPI function. Terminals are configurable in pairs for 5 V or 3.3 V logic for some functions. |
Input Limits | ±5 V |
Analog Voltage Accuracy |
|
ADC | 24-bit |
Power Requirements | 10 to 18 Vdc input |
Real-Time Clock Accuracy | ±3 min. per year (Optional GPS correction to ±10 μs) |
Internet Protocols | Ethernet, PPP, RNDIS, ICMP/Ping, Auto-IP (APIPA), IPv4, IPv6, UDP, TCP, TLS (v1.2), DNS, DHCP, SLAAC, Telnet, HTTP(S), SFTP, FTP(S), POP3/TLS, NTP, SMTP/TLS, SNMPv3, CS I/O IP, MQTT |
Communication Protocols | CPI, PakBus, SDM, SDI-12, Modbus, TCP, DNP3, UDP, NTCIP, NMEA 0183, I2C, SPI, and others |
Battery-backed SRAM for CPU Usage & Final Storage | 4 MB |
Data Storage | 4 MB SRAM + 72 MB flash (Storage expansion of up to 16 GB with removable microSD flash memory card.) |
Idle Current Drain, Average | < 1 mA (@ 12 Vdc) |
Active Current Drain, Average |
|
Dimensions | 23.8 x 10.1 x 6.2 cm (9.4 x 4.0 x 2.4 in.) Additional clearance required for cables and leads. |
Weight | 0.86 kg (1.9 lb) |
傳感器
CR1000X 兼容絕大多數傳感器, 包括模擬(電壓和電流), 熱電偶, 串口, SDI-12, 脈沖和頻率傳感器。
測量和控制外圍設備
CR1000X 兼容我們的CDM模塊, 多路器, 振弦接口板, 終端輸入模塊和繼電器。
通信
CR1000X 支持的PC連接方式包括:USB, 10/100baseT 以太網端口,多點調制解調器, 短程調制解調器, 電話調制解調器 (有線, 數字蜂窩, 語音合成), 射頻電臺,衛星發射 (HDR GOES, Argos, Meteosat, Iridium, 和 Inmarsat).
數據查看可以通過CR1000KD, CD100 帶按鍵的顯示屏, iOS 或 Android 設備 (需要安裝免費的LoggerLink app), CD295 顯示屏, 或第三方設備等。
密封
CR1000X 和電源可以安裝在任意的標準機箱內。
電源
CR1000X 需要12 Vdc 直流電源。比如BPALK, PS150, 和 PS200。
軟件
CR1000X 數據采集器通過Campbell Scientific 軟件實現編程、配置和通信。有以下幾種軟件可供選擇,其中Short Cut 和 PC200W是min配置,具體情況請與Campbell Scientific 技術支持人員聯系。
CR1000X 兼容的軟件包括:
Konect GDS
LoggerLink ( 1.6 版本或更高 )
Device Configuration Utility ( 2.16 版本或更高 )
Short Cut ( 4.0 版本或更高 )
PC200W ( 4.5 版本或更高 )
PC400 ( 4.5 版本或更高 )
LoggerNet ( 4.5版本或更高 )
LNLINUX ( 4.5 版本或更高 )
RTDAQ ( 1.3 版本或更高 )